• Designed for lowering from an anchor
• Easy to use:
– safety gate on the moving side plate allows the rope to be installed easily while the device remains connected to the anchor
– easy rope installation, thanks to the rope guide and markings
– anti-error catch to reduce the risk of an accident due to incorrect installation of the device on the rope
– ergonomic handle allows the rope to be released and enables comfortable control of the descent. Two possible descent
modes: on the side plate or in the V-shaped friction channel. The handle is specifically oriented for managing of a load from
the anchor
– anti-panic function automatically stops the descent if the user pulls too hard on the handle
The AUTO-LOCK system allows the rope to be automatically locked without having to manipulate the handle or tie off the
device. The automatic return system on the handle limits the risk of the device getting accidentally snagged
– handle automatically switches to storage position when the rope is removed from the device, reducing the risk of accidental
snagging when the descender is carried on the harness
• Versatile:
– once locked, the rope can be taken up without having to manipulate the handle, allowing to make a reversible haul system
– the moving side-plate can be locked shut with a screw, allowing the I’D EVAC to be integrated into evacuation kits
– auxiliary open brake allows the user to increase the friction in accordance with the weight of the load and the rope diameter,
and to install or release a rope at any time
• The stainless steel wear plate improves durability by reinforcing the rope friction zone
• Descending a heavy load up to 250 kg
• Rope compatibility: 10 to 11.5 mm in diameter
• Available in two colors: yellow and black
• Material(s): aluminum, steel, nylon
• Weight: 615g
• Maximum working load: 250 kg (more information in the Instructions for Use and in the technical advice at
www.petzl.com)
• Certification(s): EN 341 type 2 class A, CE EN 12841 type C, ANSI Z359.4, NFPA 1983 Technical Use, EAC
– EN 341 type 2 class A when used with a PARALLEL 10.5 mm or AXIS 11 mm rope
– EN 12841 type C when used with a 10 to 11.5 mm EN 1891 A rope
– ANSI Z359.4 when used with a 10 to 11.5 mm rope
– NFPA 1983 Technical Use when used with a 10 to 11.5 mm rope
